
Contents
- The discovery in brief
- Why diamond was thought to be non-piezoelectric
- How scientists made diamond flexible
- Why grain boundaries matter
- The numbers: what was actually measured
- A caution about the headline figure
- Latest updates: a timeline from December 2024 to November 2026
- Possible applications, ranked by realism
- What this does not mean
- Open questions
- FAQ
- Bottom line
- Sources
1. The discovery in brief
A team co-led by Professor Zhiqin Chu (Electrical and Computer Engineering) and Professor Yuan Lin (Mechanical Engineering) at HKU reported a notable piezoelectric effect in ultrathin, ultraflexible polycrystalline diamond membranes. The paper, Uncovering piezoelectric effect in polycrystalline diamond membranes, appeared in Science Advances (volume 12, issue 12) on 18 March 2026. Co-authors include Jixiang Jing, Bicong Wang, Yumeng Luo, Yicheng Wang, Zhongqiang Wang, Yiyao Liu, Dong-Keun Ki, Xinghua Shi, Qi Wang and Kwai Hei Li.
Piezoelectricity is the ability of a material to develop an electrical polarisation, and so a voltage, when it is squeezed, stretched or bent. Quartz timing crystals and ultrasound transducers are everyday examples. The HKU team found that bending their diamond membranes produced stable, repeatable voltage signals.
2. Why diamond was thought to be non-piezoelectric
Since the early 1900s, diamond has been classified as non-piezoelectric. Perfect diamond has a highly symmetric crystal lattice. Piezoelectricity needs a structure where deformation shifts positive and negative charge centres relative to each other, and a symmetric lattice cancels that shift out.
Because of this, engineers used diamond for its hardness, thermal conductivity, chemical stability, very high acoustic velocity, wide bandgap and high dielectric breakdown strength. In micro-electromechanical systems (MEMS) it has mostly served as a passive mechanical support for other piezoelectric layers, according to HKU’s own description of the field.
3. How scientists made diamond flexible
The 2026 result rests on a fabrication advance reported in Nature in December 2024. HKU, together with collaborators at the Southern University of Science and Technology and Peking University’s Dongguan Institute of Opto-Electronics, developed an edge-exposed exfoliation method. A thin diamond layer is grown on a substrate and then mechanically peeled away as a freestanding film.
The team said the prevailing assumption had been that peeling or bending an ultrathin diamond layer would make it fracture. Instead, they obtained large-area, ultraflat, flexible membranes, and reported that a two-inch wafer can be produced in about 10 seconds. The membranes are compatible with existing semiconductor manufacturing, which matters for any future device.
The diamond was not made soft. It was made thin enough to flex without cracking.
4. Why grain boundaries matter
The membranes are polycrystalline: they are made of many tiny diamond grains rather than one continuous crystal. The places where grains meet, known as grain boundaries, do not share the perfect symmetry found inside a grain.
First-principles calculations by the team indicate that:
- Grain boundaries create local structural asymmetry.
- When the membrane bends, electric polarisation changes within a small region near each boundary.
- Charge polarisation builds up as deformation increases, producing a potential difference between the top and bottom surfaces.
Secondary reporting on the paper adds that the effect is tied to polycrystalline structure and is not seen in single-crystal diamond. The paper also describes a simple atomic model in which growing grain size during film growth explains why the response changes with thickness.
5. The numbers: what was actually measured
| Item | Reported value | Source type |
|---|---|---|
| Publication | Science Advances 12(12), eaea8318, 18 March 2026 | Journal |
| Peak piezoelectric voltage coefficient | about 82.2 mV·m/N | Paper abstract |
| Thickness at peak response | about 5 micrometres | Paper abstract |
| Bending setup | Membrane attached to a flexible PET substrate, one end fixed and force applied at the other | Paper, as quoted by Yahoo Tech |
| Electrodes | 100 nm gold layers on both sides | Paper text |
| Durability | More than 7,000 bending cycles at 0.35% strain | Secondary report citing the paper |
| Example output | About 70 mV at 1.4% bending strain | Secondary report (Gadget Review); check against the paper |
The abstract states that the peak coefficient surpasses many conventional piezoelectric materials. One secondary article names barium titanate, aluminium nitride, gallium nitride and molybdenum disulphide as the comparison set. I could not open the full paper (the publisher blocked automated access), so check the exact comparison table there before quoting it.
The response depends on thickness, with the strongest effect near 5 micrometres. The team also ran repeated mechanical cycling under controlled conditions to rule out environmental noise and triboelectric artefacts, which is the usual way flexible-material voltage signals get falsely attributed.
6. A caution about the headline figure
The 82.2 mV·m/N figure is a voltage coefficient, which relates the electric field produced to the stress applied. It is not a measure of power or of stored energy.
In general, voltage coefficients are high in materials with low dielectric permittivity, and diamond’s permittivity is low. A strong voltage coefficient is therefore good news for sensing, where you want a clean voltage signal, but it does not on its own tell you how much usable power a harvester could deliver. This is my own interpretation of standard piezoelectric relationships and not a claim made in the paper. Charge coefficient, output current, power density and efficiency are the numbers to watch in future work.
7. Latest updates: a timeline from December 2024 to November 2026
- December 2024: Nature paper and HKU press conference on scalable ultraflat, ultraflexible diamond membranes.
- Late March 2026: HKU announced that the diamond fabrication project, “Scalable fabrication of flexible, ultra-flat diamond films”, was named among China’s Top 10 Scientific Advances of 2025. This recognises the fabrication method, not the piezoelectric finding. HKU pages about it are dated around 30 March 2026.
- 18 March 2026: Piezoelectric paper published in Science Advances.
- May to June 2026: Press coverage begins (Phys.org in May, then HKU’s own news pages, Nanowerk and EurekAlert around 11 to 12 June). An HKU-sponsored feature in Times Higher Education on 5 June quoted the researchers saying they were engaging industry partners in collaborative trials to show advantages in existing components.
- 29 August 2026: ScienceDaily republishes the story, followed by a wave of popular coverage in September, including viral social posts.
- October 2026: Further explainers, such as Knowridge, continue to stress that long-term stability and efficient manufacturing still need confirmation.
- 16 November 2026: I found no independent replication, no follow-up device demonstration and no commercial product. The scientific claim stands as a single peer-reviewed study from one collaboration.
Professor Chu has also said publicly that he holds 14 patents related to diamond technology and wants to bring diamond membranes to market, so commercial interest in the platform is real, even though a piezoelectric product has not been announced.
8. Possible applications, ranked by realism
Most plausible first: sensing. Bend, pressure and vibration sensors need a voltage response, and diamond adds toughness, heat tolerance and chemical stability for harsh environments. Wearable and industrial sensors are the likeliest early targets.
Next: MEMS components. Diamond has so far been a support layer in MEMS. An active piezoelectric diamond layer could simplify some designs and combine thermal and mechanical advantages.
Longer term: biomedical devices. HKU highlights diamond’s biocompatibility, chemical stability and non-toxicity as reasons to explore self-powered implants and deformation sensors. This is a stated direction, not a demonstrated device. Safety, packaging, long-term reliability and regulatory approval would all be required.
Most speculative: energy harvesting. The paper’s abstract names energy harvesting as an area the finding could catalyse. Whether the power output is large enough to be useful is unknown.
9. What this does not mean
- A diamond ring will not charge your phone. The effect was shown in engineered membranes only a few micrometres thick, not in gemstones.
- Lab-grown gemstones are not suddenly power sources. The effect was reported for polycrystalline membranes and was not seen in single-crystal diamond.
- This is not a battery replacement.
- A voltage signal is not the same as usable power.
10. Open questions
- How much power and energy can a membrane deliver, and at what efficiency?
- Does performance hold beyond the 7,000 cycles reported, over millions of cycles?
- Can other labs reproduce the thickness dependence and the grain-boundary mechanism?
- Can membranes with consistent grain structure be produced at scale and at competitive cost?
- How well can the membranes be integrated with electrodes, circuits and packaging?
- How does the response change with temperature, humidity and in biological environments?
11. FAQ
Can diamond really generate electricity when bent? Yes, in the specific form tested: ultrathin polycrystalline membranes bent in the lab produced stable, repeatable voltages.
Who made the discovery? A team co-led by Professors Zhiqin Chu and Yuan Lin at the University of Hong Kong, with collaborators including Kwai Hei Li of the Southern University of Science and Technology.
Is the result peer reviewed? Yes, it was published in Science Advances on 18 March 2026.
Why wasn’t diamond piezoelectric before? Its symmetric lattice cancels out the charge shift needed. Grain boundaries in polycrystalline films break that symmetry locally.
What thickness works best? Around 5 micrometres in the reported experiments.
Is it commercially available? No.
Could it power a pacemaker? That is a long-term hope voiced by the researchers and commentators, not something demonstrated.
12. Bottom line
The real news is scientific. A material classed as non-piezoelectric for over a hundred years can show a strong piezoelectric voltage response once it is made as a thin, flexible polycrystalline film, thanks to its grain boundaries. The most credible near-term payoff is in sensors and MEMS, with biomedical and energy-harvesting uses depending on data that has not yet been published. Expect follow-up work on power output, durability and scale-up before anything reaches a product.
13. Sources
- Science Advances (2026): Uncovering piezoelectric effect in polycrystalline diamond membranes. Original peer-reviewed research. Read the research paper.
- University of Hong Kong (HKU): Official research announcement, Piezoelectric effect in diamond membranes challenges century-old scientific dogma. Read the announcement.
- HKU Department of Electrical and Computer Engineering: Research summary and publication details. Read the research summary.
- Phys.org (2026): Independent science-news coverage of the diamond piezoelectricity discovery. Read the report.
- ScienceDaily (2026): Science-news coverage of the discovery, sourced from the University of Hong Kong. Read the report.
- University of Hong Kong (2024): Scalable production of ultraflat and ultraflexible diamond membrane. Original manufacturing research published in Nature. Read the research paper.
- University of Hong Kong (2026): Announcement of its ultra-thin diamond fabrication technology being named among China’s Top 10 Scientific Advances of 2025. Read the announcement.
- EurekAlert (2026): University of Hong Kong research announcement on the piezoelectric effect in diamond membranes. Read the release.
Author: Atia Arefin | Published: November 6, 2026 | Last updated: November 16, 2026
Sources: Science Advances, University of Hong Kong (HKU), HKU Department of Electrical and Computer Engineering, Nature, Phys.org, ScienceDaily and EurekAlert.
Image: Navigate Explained. The featured image is illustrative and represents flexible diamond membranes, piezoelectric electricity generation and emerging semiconductor technology. It is not an official University of Hong Kong research image and does not imply endorsement by HKU or the researchers.
How we check and correct our articles: Editorial Policy. To report an error, contact us.
This article is provided for general informational and educational purposes only. Scientific findings, experimental measurements and potential applications are discussed based on published research and institutional announcements. The reported laboratory results do not establish commercial availability or demonstrate that diamond membranes can currently generate enough electricity to power consumer devices. Potential applications remain subject to further research, testing and independent verification.













































Leave a Reply